Task #7113 (closed)
ROI Id, Shape ID
Reported by: | jburel | Owned by: | jburel |
---|---|---|---|
Priority: | minor | Milestone: | OMERO-4.4 |
Component: | Insight | Version: | n.a. |
Keywords: | n.a. | Cc: | wmoore, saloynton |
Resources: | n.a. | Referenced By: | n.a. |
References: | n.a. | Remaining Time: | 0.0d |
Sprint: | 2011-11-10 (2) |
Description
The id of the shape is not displayed, it is always the id of the roi. This should be fixed but do we really need to show the id?
Change History (6)
comment:1 Changed 13 years ago by jburel
- Remaining Time set to 0.1
- Status changed from new to accepted
comment:2 Changed 13 years ago by wmoore
comment:3 Changed 13 years ago by jburel
ok
The difference between web and insight is that new shape can be created in insight.
When a new shape is added, the value displayed for the roi Id column will be "--".
comment:4 Changed 13 years ago by jburel
To test:
- Open the MT.
- Select the inspector tab (default)
- Draw a shape.
- When the new shape has not been saved, the id column will indicate --
- Save the roi.
- The roi id and shape id should be different. If they are the same (not luck when saving), draw a new one and save.
- go to the results tab. Select a shape and make sure the shape id is displayed.
comment:5 Changed 13 years ago by jburel
- Remaining Time changed from 0.1 to 0
- Status changed from accepted to closed
comment:6 Changed 12 years ago by Jean-marie Burel <j.burel@…>
- Resolution set to fixed
(In [4e692a822ccb9abaaf75d1f8ebe31d33a4c50340/ome.git]) Fix ROI shape id display (close #7113)
I was thinking of a script once that would use an ROI ID. I don't think I ever wrote it, but you could imagine external analysis or scripts wanting to start with ROI ID. Not sure about shape ID. We show users Imgae IDs etc, so it's kinda the same logic (although not quite as useful).